Greek
K NOCTUA NH-P1 (silber)
Product code: 10652922 // MPN: NH-P1 // EAN: 9010018000269
New entry
Similar products
The NH-P1 is Noctua’s first passive CPU cooler and has been custom-designed for fanless operation from the ground up: in enclosures with good natural convection. its six heatpipes and thick. widely spaced heatsink fins enable it to cool modern high-end CPUs with low to moderate heat dissipation completely passively (see setup guidelines and list of recommended cases). For further enhanced performance or semi-passive setups that only spin up their fans when necessary. the NH-P1 can be outfitted with a low-speed. ultra-quiet 120mm fan such as the NF-A12x25 LS-PWM. Topped off with the professional Torx-based SecuFirm2+ mounting system. Noctua’s award-winning NT-H2 thermal compound and a 6-year manufacturer’s warranty. the NH-P1 is the ideal cornerstone for premium-grade fanless or semi-passive builds.
Designed for passive cooling from the ground up
The NH-P1 isn’t just a regular heatsink without a fan: it has been designed for fanless operation from the ground up. featuring much thicker. much more widely spaced fins in order to achieve both the mass and the minimal airflow resistance that are required in order to excel in natural convection cooling.
Fanless cooling for high-end CPUs
In fully optimised fanless systems. the NH-P1 is capable of cooling high-end CPUs with low to moderate heat dissipation using natural convection only (see setup guidelines and CPU compatibility list). This makes it ideal for powerful builds that have no moving parts and run absolutely silent.
Increased performance headroom with extra fan
The NH-P1 can be fitted with an extra 120mm fan such as the near inaudible NF-A12x25 LS-PWM in order to increase its maximum dissipation capacity significantly (see setup guidelines and CPU compatibility list): ideal for short spikes of higher heat loads or semi-passive systems that only start their fans when necessary!
No noise. less dust. 100% fail-proof
Fanless cooling doesn’t only have the advantage of being completely silent: if you’re relying on natural convection only and don’t have case fans pushing air through a case. less dust will accumulate in filters or inside the system. Last but not least. with no moving parts such as fans or pumps that could possibly fail. the NH-P1 is as fail-proof as it can be.
Asymmetrical layout for optimal PCIe compatibility
As many current motherboards have the top PCIe x16 slot sitting close to the socket. bigger heatsinks tend to block it. Due to its asymmetrical layout. the fin-stack of the NH-P1 is offset towards the upper edge of the motherboard when installed in standard orientation. This allows it to clear the top PCIe x16 slot on most current µATX and ATX motherboards (see motherboards compatibility list).
100% RAM compatibility on LGA1851/LGA1700 and AM4/AM5
Due to its asymmetric design. the NH-P1 does not overhang the RAM slots on Intel LGA1851/LGA1700/LGA1200/LGA115x and AMD AM4/AM5 based motherboards. which ensures easy access to the modules and 100% compatibility with DIMMs that feature tall heat-spreaders.
SecuFirm2+™ Torx-based multi-socket mounting system
Noctua’s SecuFirm2™ mounting systems have become synonymous with quality. safety and easy installation. Torx-based. the professional SecuFirm2+™ version with its included screwdriver provides even better handling and durability. Socket support includes Intel LGA1851. LGA1700 (since 2021). LGA1200. LGA115x (LGA1150. LGA1151. LGA1155. LGA1156) as well as AMD AM4 and AM5 (since 2019).
Compatibility with past and future sockets
Thanks to Noctua’s SecuFirm™ ecosystem. the NH-P1 can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit. which is provided free of charge. If technically possible. Noctua will also provide upgrade kits for future sockets. which makes the NH-P1 a safe long-term investment.
NT-H2 next-gen thermal compound
In high-end passive cooling. every degree counts. This is why the NH-P1 includes a tube of Noctua’s next-generation NT-H2 thermal compound that provides even better performance than the award-winning NT-H1. allowing you to achieve the best possible passive cooling results.
Soldered interface between heatpipes and fins
With many heatsinks. the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium. this fit can loosen over years of thermal cycling. which may lead to reduced performance. By contrast. the NH-P1’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.
Performance
Suitable location: Processor
Type: Heatsink/Radiator
Quantity per pack: 1 pc(s)
Design
Product colour: Aluminium
Material: Aluminium. Copper
Base plate material: Copper
Weight & dimensions
Width: 158 mm
Depth: 154 mm
Height: 152 mm
Weight: 1.18 kg
Package width: 194 mm
Package depth: 194 mm
Package height: 224 mm
Package weight: 1.97 kg
Packaging content
Feature: Mounting kit
Logistics data
Harmonized System (HS) code: 84733080
Designed for passive cooling from the ground up
The NH-P1 isn’t just a regular heatsink without a fan: it has been designed for fanless operation from the ground up. featuring much thicker. much more widely spaced fins in order to achieve both the mass and the minimal airflow resistance that are required in order to excel in natural convection cooling.
Fanless cooling for high-end CPUs
In fully optimised fanless systems. the NH-P1 is capable of cooling high-end CPUs with low to moderate heat dissipation using natural convection only (see setup guidelines and CPU compatibility list). This makes it ideal for powerful builds that have no moving parts and run absolutely silent.
Increased performance headroom with extra fan
The NH-P1 can be fitted with an extra 120mm fan such as the near inaudible NF-A12x25 LS-PWM in order to increase its maximum dissipation capacity significantly (see setup guidelines and CPU compatibility list): ideal for short spikes of higher heat loads or semi-passive systems that only start their fans when necessary!
No noise. less dust. 100% fail-proof
Fanless cooling doesn’t only have the advantage of being completely silent: if you’re relying on natural convection only and don’t have case fans pushing air through a case. less dust will accumulate in filters or inside the system. Last but not least. with no moving parts such as fans or pumps that could possibly fail. the NH-P1 is as fail-proof as it can be.
Asymmetrical layout for optimal PCIe compatibility
As many current motherboards have the top PCIe x16 slot sitting close to the socket. bigger heatsinks tend to block it. Due to its asymmetrical layout. the fin-stack of the NH-P1 is offset towards the upper edge of the motherboard when installed in standard orientation. This allows it to clear the top PCIe x16 slot on most current µATX and ATX motherboards (see motherboards compatibility list).
100% RAM compatibility on LGA1851/LGA1700 and AM4/AM5
Due to its asymmetric design. the NH-P1 does not overhang the RAM slots on Intel LGA1851/LGA1700/LGA1200/LGA115x and AMD AM4/AM5 based motherboards. which ensures easy access to the modules and 100% compatibility with DIMMs that feature tall heat-spreaders.
SecuFirm2+™ Torx-based multi-socket mounting system
Noctua’s SecuFirm2™ mounting systems have become synonymous with quality. safety and easy installation. Torx-based. the professional SecuFirm2+™ version with its included screwdriver provides even better handling and durability. Socket support includes Intel LGA1851. LGA1700 (since 2021). LGA1200. LGA115x (LGA1150. LGA1151. LGA1155. LGA1156) as well as AMD AM4 and AM5 (since 2019).
Compatibility with past and future sockets
Thanks to Noctua’s SecuFirm™ ecosystem. the NH-P1 can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit. which is provided free of charge. If technically possible. Noctua will also provide upgrade kits for future sockets. which makes the NH-P1 a safe long-term investment.
NT-H2 next-gen thermal compound
In high-end passive cooling. every degree counts. This is why the NH-P1 includes a tube of Noctua’s next-generation NT-H2 thermal compound that provides even better performance than the award-winning NT-H1. allowing you to achieve the best possible passive cooling results.
Soldered interface between heatpipes and fins
With many heatsinks. the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium. this fit can loosen over years of thermal cycling. which may lead to reduced performance. By contrast. the NH-P1’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.
Performance
Suitable location: Processor
Type: Heatsink/Radiator
Quantity per pack: 1 pc(s)
Design
Product colour: Aluminium
Material: Aluminium. Copper
Base plate material: Copper
Weight & dimensions
Width: 158 mm
Depth: 154 mm
Height: 152 mm
Weight: 1.18 kg
Package width: 194 mm
Package depth: 194 mm
Package height: 224 mm
Package weight: 1.97 kg
Packaging content
Feature: Mounting kit
Logistics data
Harmonized System (HS) code: 84733080
Ask a question about the product
New entry
New entry
New entry
